Reply to thread

Message

<blockquote data-quote="Marsellus Fariss" data-source="post: 49406" data-attributes="member: 1107">Re: Problem connecting to BSS 9088ii&#039;s. Can you help?Thanks Gordon!It&#039;s 115200 for the rear and 9800 for the front right.. I know my serial to USB adapter is working as it talks to the XTA&#039;s just fine. So all I do it change the baud rate to 115200 and make sure Sound Designer is set to the same com port (which is it) and it should work. But it doesn&#039;t. As it seems I may need to have a cable for the front port around anyway if what you say about the firmware is correct I might as well make one. The pin out is in the Sound Designer help file. that&#039;s about all that&#039;s really left to try.Oh.. I also popped the top of the units to check for burst caps and cooling fan issues and firmware version. 1.04 and 1.06 chips in there though they may have been flashed at some point. so I downloaded an older compatible version of Sound Designer just in case. No luck.</blockquote>

[QUOTE="Marsellus Fariss, post: 49406, member: 1107"] Re: Problem connecting to BSS 9088ii's. Can you help? Thanks Gordon! It's 115200 for the rear and 9800 for the front right.. I know my serial to USB adapter is working as it talks to the XTA's just fine. So all I do it change the baud rate to 115200 and make sure Sound Designer is set to the same com port (which is it) and it should work. But it doesn't. As it seems I may need to have a cable for the front port around anyway if what you say about the firmware is correct I might as well make one. The pin out is in the Sound Designer help file. that's about all that's really left to try. Oh.. I also popped the top of the units to check for burst caps and cooling fan issues and firmware version. 1.04 and 1.06 chips in there though they may have been flashed at some point. so I downloaded an older compatible version of Sound Designer just in case. No luck. [/QUOTE]

Verification