Hey group so I recently purchase the rcf ttl55a line array cabinets...I was wondering if any one knows any recommended settings to use with these cabinets... also if anyone is familiar with the cabinets I would appreciate some feed back on the cabinet thank you!
Rcf Ttl 55a line array cabinet
- Thread starter david johnson
- Start date
Re: Rcf Ttl 55a line array cabinet
Congrats! How many did you get? I can't answer your question directly, but most of these new, powered with DSP boxes, don't need much external processing. Are you using RDnet? I would make time for a test day and put the boxes in the recommended DSP settings and do a lot of test listening.
I did the same when I bought dB Technologies T12's, T8's, and S30's. No external processing and very little if any EQ needed. Good luck!
Congrats! How many did you get? I can't answer your question directly, but most of these new, powered with DSP boxes, don't need much external processing. Are you using RDnet? I would make time for a test day and put the boxes in the recommended DSP settings and do a lot of test listening.
I did the same when I bought dB Technologies T12's, T8's, and S30's. No external processing and very little if any EQ needed. Good luck!
Re: Rcf Ttl 55a line array cabinet
I brought 10 cabinets in total. The cabinets sound great but I was just wondering if there are any recommended settings for these cabinets and yes I'm using rdnet with it as well.
I brought 10 cabinets in total. The cabinets sound great but I was just wondering if there are any recommended settings for these cabinets and yes I'm using rdnet with it as well.
Re: Rcf Ttl 55a line array cabinet
The Array Designer app should tell you what settings to use per box, at least it does with the HDL range.
Sent from my iPhone
The Array Designer app should tell you what settings to use per box, at least it does with the HDL range.
Sent from my iPhone
Re: Rcf Ttl 55a line array cabinet
I am assuming that you are using RDnet with the boxes. Really it depends on the venue size, throw, etc. You should be building the array in http://www.rcf.it/en_US/c/document_library/get_file?p_l_id=256731&folderId=39723&name=DLFE-1704.zip which will give you the proper settings of the cabinets.
I am assuming that you are using RDnet with the boxes. Really it depends on the venue size, throw, etc. You should be building the array in http://www.rcf.it/en_US/c/document_library/get_file?p_l_id=256731&folderId=39723&name=DLFE-1704.zip which will give you the proper settings of the cabinets.