Reply to thread

Message

Re: Refinishing Speaker Cabs

A belt sander with 60 grit on the flats, random orbit or regular orbital sander on the rounded edges. Touch up with 60grit with the random orbit sander. Any gouges? Fill with bondo and level out with same.

A random orbital sander with 60grit or coarser if you're not comfortable with a belt sander.

I would then take them to a Line-X shop and have the sprayed there. The rough sanded surface is desirable for adhesion. The final product will be thicker and offer more protection.

Best regards,

John

[QUOTE="John Halliburton, post: 16022, member: 8"] Re: Refinishing Speaker Cabs A belt sander with 60 grit on the flats, random orbit or regular orbital sander on the rounded edges. Touch up with 60grit with the random orbit sander. Any gouges? Fill with bondo and level out with same. A random orbital sander with 60grit or coarser if you're not comfortable with a belt sander. I would then take them to a Line-X shop and have the sprayed there. The rough sanded surface is desirable for adhesion. The final product will be thicker and offer more protection. Best regards, John [/QUOTE]

Verification