Reply to thread

Message

<blockquote data-quote="Tom Manchester" data-source="post: 83795" data-attributes="member: 82">Re: S-Fill front fill cabinetI did some preliminary tunings for the S-Fill yesterday. It sounds very good for a &quot;small&quot; box. I&#039;d say it&#039;s definitely on par sound wise with the benchmark JF80, but I didn&#039;t have a lot of time to really optimize it, so there is room to grow. Right now it measures (and sounds) very flat, less than about 3db deviation from 200-12k, it just needs a little bit of voicing now to work well when put up against monitor wash and backline. They&#039;re headed out to a show this weekend so I&#039;ll have my laptop on hand to do the necessary tweaks to make it play well with the wedges. In the interim, I worked on the new mid-size box for the whole S-Line system. This is the flyable outfill / high power frontfill / utility box. It&#039;s a 12+2&quot; box utilizing the same drivers as many of the other boxes I have in inventory, which makes it easy to keep spare parts on hand. Here&#039;s some pictures after the final paint coat and with the grills installed.</blockquote>

[QUOTE="Tom Manchester, post: 83795, member: 82"] Re: S-Fill front fill cabinet I did some preliminary tunings for the S-Fill yesterday. It sounds very good for a "small" box. I'd say it's definitely on par sound wise with the benchmark JF80, but I didn't have a lot of time to really optimize it, so there is room to grow. Right now it measures (and sounds) very flat, less than about 3db deviation from 200-12k, it just needs a little bit of voicing now to work well when put up against monitor wash and backline. They're headed out to a show this weekend so I'll have my laptop on hand to do the necessary tweaks to make it play well with the wedges. In the interim, I worked on the new mid-size box for the whole S-Line system. This is the flyable outfill / high power frontfill / utility box. It's a 12+2" box utilizing the same drivers as many of the other boxes I have in inventory, which makes it easy to keep spare parts on hand. Here's some pictures after the final paint coat and with the grills installed. [/QUOTE]

Verification