Reply to thread

Message

<blockquote data-quote="Jordan Ochocki" data-source="post: 26919" data-attributes="member: 187">Re: SC48 Post forward from PSWBrian, I will try to address some of your questions that I don&#039;t feel have gotten a full answer yet.&nbsp; I also will second using the matrix to drive every output.&nbsp; Much easier to tweak different sections of the rig.Are you attempting to have another engineer run monitors via tablet while you mix FOH on the same console?&nbsp; That is the only reason I would think this matters.If you hit the Insert Mode button to the right of the output encoders, it will map plugin controls to those encoders.&nbsp; If there are more than 8 controls to a plugin, you use the next and previous page buttons right above the Insert Mode button.&nbsp; Very useful for things like dynamics or simple eq&#039;s, slightly less useful for complicated plugins like reverbs.&nbsp; It will, however, remember the page you were on, so if you come back to that reverb to control decay time, it is still on that page.What you are referring to is what I believe can be changed in the options tab.&nbsp; I believe it is under the interactions sub-tab.&nbsp; Something like screen follows input/output selection or something like that.If this is because you are having trouble getting an encoder value to what you want, you can hold the Fine button (it&#039;s on the left hand side of board next to the bank buttons) while you move the encoder.&nbsp; It will slow down the movement.&nbsp; You can also tap it twice quickly to lock it into Fine mode.What has really helped me with console is forcing myself not to use the mouse.&nbsp; You can pretty much get to everything you need during a show without touching the mouse.&nbsp; Unless I am digging through the options tab or saving/loading shows, the mouse sits unused.</blockquote>

[QUOTE="Jordan Ochocki, post: 26919, member: 187"] Re: SC48 Post forward from PSW Brian, I will try to address some of your questions that I don't feel have gotten a full answer yet. I also will second using the matrix to drive every output. Much easier to tweak different sections of the rig. Are you attempting to have another engineer run monitors via tablet while you mix FOH on the same console? That is the only reason I would think this matters. If you hit the Insert Mode button to the right of the output encoders, it will map plugin controls to those encoders. If there are more than 8 controls to a plugin, you use the next and previous page buttons right above the Insert Mode button. Very useful for things like dynamics or simple eq's, slightly less useful for complicated plugins like reverbs. It will, however, remember the page you were on, so if you come back to that reverb to control decay time, it is still on that page. What you are referring to is what I believe can be changed in the options tab. I believe it is under the interactions sub-tab. Something like screen follows input/output selection or something like that. If this is because you are having trouble getting an encoder value to what you want, you can hold the Fine button (it's on the left hand side of board next to the bank buttons) while you move the encoder. It will slow down the movement. You can also tap it twice quickly to lock it into Fine mode. What has really helped me with console is forcing myself not to use the mouse. You can pretty much get to everything you need during a show without touching the mouse. Unless I am digging through the options tab or saving/loading shows, the mouse sits unused. [/QUOTE]

Verification