Reply to thread

Message: <blockquote data-quote="tony krasinski" data-source="post: 213327" data-attributes="member: 13780">Got this from Sennheiser - very quick response BTWEssentially, you do not want to try and scan on the rack mount transmitter but on the receiver body pack. Essentially first set your squelch to 5db on the pack and then go into the easy set up there, select scan new list and then it should scan. Once it lands on a bank and channel select the first open frequency and then go back to squelch and set it to 15 db. Once set then sync the pack to the transmitter so they match or use the frequency preset option in the transmitter to match the bank and channel.</blockquote>

Top Bottom