I am offering a service of repairing / replacing broken connectors, on lav mics, and also converting them to a different type of connector.
Here are the Mics I work on:
All DPA lav and headsets - 4061, 4086, 4088, d:fine, etc
All Sennheiser lavs and headsets : MKE1, MKE2, etc
Countryman B3, E3, B6, E6
I may be able to do others, PM me to find out
Connectors I can repair / replace:
1/8" locking TRS for Sennheiser EW serie
TA4F for Shure Wireless
TA5F for Lectrosonics
3 Pin Lemo for Zaxcom and Sennheiser 5000 Series transmitters
Typically I charge $20 per mic plus parts ($6 or less except for 3 pin lemo which is 25) but I am flexible on price depending on if you have a large number of mics.
I can also make custom snakes/ adaptors / wiring projects. PM me for prices
Here are the Mics I work on:
All DPA lav and headsets - 4061, 4086, 4088, d:fine, etc
All Sennheiser lavs and headsets : MKE1, MKE2, etc
Countryman B3, E3, B6, E6
I may be able to do others, PM me to find out
Connectors I can repair / replace:
1/8" locking TRS for Sennheiser EW serie
TA4F for Shure Wireless
TA5F for Lectrosonics
3 Pin Lemo for Zaxcom and Sennheiser 5000 Series transmitters
Typically I charge $20 per mic plus parts ($6 or less except for 3 pin lemo which is 25) but I am flexible on price depending on if you have a large number of mics.
I can also make custom snakes/ adaptors / wiring projects. PM me for prices