Reply to thread

Message

<blockquote data-quote="brian maddox" data-source="post: 35571" data-attributes="member: 158">Re: Setting up an Audiorail system and need WC advice.okay, i used to have a similar system.&nbsp; here&#039;s a couple of thoughts.1. i used to run wordclock down a cat5 line.&nbsp; i had multiple lines in our building and i used two for two runs of audiorail [i needed 48 channels one way] and a third for wordclock.&nbsp; ran from my 01v96 to several presonus mic pre&#039;s.&nbsp; just used bnc T&#039;s to link them together.&nbsp; i used simple video baluns to convert the signal from bnc to cat5 and back. don&#039;t know if that&#039;s the &#039;right&#039; way, but i had all the pieces so i tried it and it worked.&nbsp; total length of the run had to approach the limit of the audiorail as&nbsp; it went all the way across our building and through our network room.&nbsp;&nbsp; i ran it that way every sunday [this is a church install] for almost 2 years.&nbsp; it was bulletproof.2.&nbsp; i&#039;ve used an ART clock gen. for several years.&nbsp; it&#039;s worked great.&nbsp; &nbsp; FWIW...i don&#039;t begin to pretend to know much about this subject.&nbsp; but this is what has worked for me...</blockquote>

[QUOTE="brian maddox, post: 35571, member: 158"] Re: Setting up an Audiorail system and need WC advice. okay, i used to have a similar system. here's a couple of thoughts. 1. i used to run wordclock down a cat5 line. i had multiple lines in our building and i used two for two runs of audiorail [i needed 48 channels one way] and a third for wordclock. ran from my 01v96 to several presonus mic pre's. just used bnc T's to link them together. i used simple video baluns to convert the signal from bnc to cat5 and back. don't know if that's the 'right' way, but i had all the pieces so i tried it and it worked. total length of the run had to approach the limit of the audiorail as it went all the way across our building and through our network room. i ran it that way every sunday [this is a church install] for almost 2 years. it was bulletproof. 2. i've used an ART clock gen. for several years. it's worked great. FWIW... i don't begin to pretend to know much about this subject. but this is what has worked for me... [/QUOTE]

Verification