Normal
Re: Snake problemsI've had this same problem with a number of our (day job) Whirlwind hybrid cables. I just spin the strain relief off, go back about 5', stretch the jacket toward the connector, and spin the strain relief back on. When the problem is on a fan, it may be rather tricky getting the edge of the jacket back under the shrink.
Re: Snake problems
I've had this same problem with a number of our (day job) Whirlwind hybrid cables. I just spin the strain relief off, go back about 5', stretch the jacket toward the connector, and spin the strain relief back on. When the problem is on a fan, it may be rather tricky getting the edge of the jacket back under the shrink.
