Reply to thread

Message

<blockquote data-quote="Per SÃ¸vik" data-source="post: 73745" data-attributes="member: 1285">Re: So I&#039;m Going To Mix My First Live Band This Weekend With The X32 &amp; I&#039;m Looking FoEfx on vocals should be fairly easy if you haven&#039;t changed anything from the factory setup. You have reverb on 13 and 14, delay on 15 and chorus on 16. The fx-returns are routed to main LR, and both the bus mastersends and the fx-returns are by default at 0dB. Quickest way to set up the effect sends are normally to use sends on fader, so if you have your chan1-16 selected on the left fader bank and Bus9-16 selected on the right bank, select bus 13 - then &lt;sends on fader&gt; - then pull up the faders on the vocal channels, and you should hear some reverb. Same for bus 14-15-16. You can also use the sends-on-faders the other way around, select a vocal channel first -&gt;sends on faders&gt; and then adjust the faders on the buses you are sending toAs far as effect usage goes, Christian Boche explains his settings somewher in the X32 thread, maybe if you have time to search a bit you&#039;ll get some hints.Edit: Here is one post: <a href="http://soundforums.net/junior-varsity/4393-x32-discussion-71.html#post36611" target="_blank">http://soundforums.net/junior-varsity/4393-x32-discussion-71.html#post36611</a></blockquote>

[QUOTE="Per SÃ¸vik, post: 73745, member: 1285"] Re: So I'm Going To Mix My First Live Band This Weekend With The X32 & I'm Looking Fo Efx on vocals should be fairly easy if you haven't changed anything from the factory setup. You have reverb on 13 and 14, delay on 15 and chorus on 16. The fx-returns are routed to main LR, and both the bus mastersends and the fx-returns are by default at 0dB. Quickest way to set up the effect sends are normally to use sends on fader, so if you have your chan1-16 selected on the left fader bank and Bus9-16 selected on the right bank, select bus 13 - then <sends on fader> - then pull up the faders on the vocal channels, and you should hear some reverb. Same for bus 14-15-16. You can also use the sends-on-faders the other way around, select a vocal channel first ->sends on faders> and then adjust the faders on the buses you are sending to As far as effect usage goes, Christian Boche explains his settings somewher in the X32 thread, maybe if you have time to search a bit you'll get some hints. Edit: Here is one post: [URL]http://soundforums.net/junior-varsity/4393-x32-discussion-71.html#post36611[/URL] [/QUOTE]

Verification