Reply to thread

Message

Re: Soldering Station- 10awg

Yes, you'll need a larger iron, or as you've concluded, a decent soldering station. My recommendation for many years is to invest in a
Hakko 936. You can get this station with a small, medium, or large iron. I suspect you'll need the large iron for 10awg work. Lots of tips are available too.

A good value, typically around 80-100USD.

http://www.tequipment.net/HakkoSolderingStations.html

Best regards,

John

[QUOTE="John Halliburton, post: 34704, member: 8"] Re: Soldering Station- 10awg Yes, you'll need a larger iron, or as you've concluded, a decent soldering station. My recommendation for many years is to invest in a Hakko 936. You can get this station with a small, medium, or large iron. I suspect you'll need the large iron for 10awg work. Lots of tips are available too. A good value, typically around 80-100USD. [url]http://www.tequipment.net/HakkoSolderingStations.html[/url] Best regards, John [/QUOTE]

Verification