Reply to thread

Message: <blockquote data-quote="Rob Spence" data-source="post: 209312" data-attributes="member: 80">What mixer do you use?Delay in principle isn’t hard. Sound travels at around 1ft each millisecond.So, a starting setting for delay speakers can be done by simply measuring how far they are in front of the mains and use that number of ms. Then, with some sound playing (or sometimes I use a handheld wireless mic), walk toward the stage and listen for the transition from delay speakers to the mains. Adjust the delay setting a few ms at a time until you don’t notice the transition. Of course, it cannot be correct everywhere but get it right for the most you can.</blockquote>

Top Bottom