Reply to thread

Message

<blockquote data-quote="Langston Holland" data-source="post: 55863" data-attributes="member: 171">EAW Resolution UsageHey Shane:Deselect the &quot;Array&quot; and &quot;Property&quot; panes in the View menu and you might like what you see better. <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" />Other things to try with Resolution:<ol>
<li data-xf-list-type="ol">In Options, set both &quot;Side&quot; and &quot;Top&quot; View Contour Lines to 3dB per division.</li>
<li data-xf-list-type="ol">For sub arrays, select 1/3 and 1 octave at the kick fundamental of 63Hz in Venue Pane.</li>
<li data-xf-list-type="ol">For high frequency arrays, select 3 octave at 2kHz for the critical midrange in Venue Pane.</li>
<li data-xf-list-type="ol">For high frequency flown arrays, in Array Assistant you&#039;ll almost always want to select &quot;Allow Upper Overshoot&quot;. Always play around with the suggested fly grid pick point and interbox pinning locations, it&#039;s not hard to beat the software&#039;s recommendation. It is hard to significantly beat the software&#039;s recommendation, but it&#039;s fun and quite educational to try.</li>
<li data-xf-list-type="ol">Hover your mouse over all the little greens circles of your fly grid and loudspeakers in the Array Pane. Hang (12) of your KF730&#039;s all with &quot;1-A&quot; pinning locations and move the fly grid pick point &quot;Position&quot; to 13. Look for red and yellow circles and hover your mouse over them. Move the pick point to 12, then 11, then 10 and observe the circles changing color. Learn the max weight loads of these pins.</li>
<li data-xf-list-type="ol">In Options, select design factor and reduce it to 8:1 or 5:1 and watch the circles change color again.</li>
<li data-xf-list-type="ol">Right click on the Array and Venue panes.</li>
</ol>Make sure you have other things to do because Resolution crawls as it only engages a single core of your CPU.</blockquote>

[QUOTE="Langston Holland, post: 55863, member: 171"] EAW Resolution Usage Hey Shane: Deselect the "Array" and "Property" panes in the View menu and you might like what you see better. :) [U]Other things to try with Resolution[/U]: [LIST=1] [*]In Options, set both "Side" and "Top" View Contour Lines to 3dB per division. [*]For sub arrays, select 1/3 and 1 octave at the kick fundamental of 63Hz in Venue Pane. [*]For high frequency arrays, select 3 octave at 2kHz for the critical midrange in Venue Pane. [*]For high frequency flown arrays, in Array Assistant you'll almost always want to select "Allow Upper Overshoot". Always play around with the suggested fly grid pick point and interbox pinning locations, it's not hard to beat the software's recommendation. It is hard to significantly beat the software's recommendation, but it's fun and quite educational to try. [*]Hover your mouse over all the little greens circles of your fly grid and loudspeakers in the Array Pane. Hang (12) of your KF730's all with "1-A" pinning locations and move the fly grid pick point "Position" to 13. Look for red and yellow circles and hover your mouse over them. Move the pick point to 12, then 11, then 10 and observe the circles changing color. Learn the max weight loads of these pins. [*]In Options, select design factor and reduce it to 8:1 or 5:1 and watch the circles change color again. [*]Right click on the Array and Venue panes. [/LIST] Make sure you have other things to do because Resolution crawls as it only engages a single core of your CPU. [/QUOTE]

Verification