Log in
Register
Home
Forums
New posts
Search forums
What's new
New posts
New profile posts
Latest activity
News
Members
Current visitors
New profile posts
Search profile posts
Features
Log in
Register
Search
Search titles only
By:
Search titles only
By:
New posts
Search forums
Menu
Install the app
Install
Reply to thread
Home
Forums
Low Earth Orbit
DIY Audio
The End of the mid-range as DIY
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Message
<blockquote data-quote="Mark DeArman" data-source="post: 5191" data-attributes="member: 950"><p>The rest of the photos and the measurement from implementing the new 10in. Unfortunately I can't show the photo of final version of the new 10in. I pulled two boxes at a time into the air and measured the LF increase vs. MF for the array. Measurements pictured were on the ground, the levels at audience height were pretty flat. We had it lucky and it was only 80degF for the load in with three of us.</p><p></p><p>P.S. In the measurement picture I had the mid range turned down so I didn't blow my ears out at FOH. I also didn't have the microphones set to any reference. I took the measurements at 70ft from the array. FOH was positioned at 113ft from the array. Trim height was 27ft for the 14box measurement. Floor rise from the array was 3ft to FOH position.</p></blockquote><p></p>
[QUOTE="Mark DeArman, post: 5191, member: 950"] The rest of the photos and the measurement from implementing the new 10in. Unfortunately I can't show the photo of final version of the new 10in. I pulled two boxes at a time into the air and measured the LF increase vs. MF for the array. Measurements pictured were on the ground, the levels at audience height were pretty flat. We had it lucky and it was only 80degF for the load in with three of us. P.S. In the measurement picture I had the mid range turned down so I didn't blow my ears out at FOH. I also didn't have the microphones set to any reference. I took the measurements at 70ft from the array. FOH was positioned at 113ft from the array. Trim height was 27ft for the 14box measurement. Floor rise from the array was 3ft to FOH position. [/QUOTE]
Insert quotes…
Verification
Post reply
Home
Forums
Low Earth Orbit
DIY Audio
The End of the mid-range as DIY
Top
Bottom
Sign-up
or
log in
to join the discussion today!