Reply to thread

Message

<blockquote data-quote="Brian Adams" data-source="post: 124376" data-attributes="member: 963">Re: Thoughts on a mic stand caseThey&#039;re just slotted together. There are no brackets or rivets or anything holding the dividers in place, since I didn&#039;t want anything in there to catch or scratch the stands.&nbsp;There&#039;s a slotted plywood surround in each of the big compartments to hold the edges, including the bottom, then the plastic sheets are slotted together, with the top slot being shorter to maximize strength at the top. I&#039;m not sure exactly what the plastic is, it&#039;s kind of like Coroplast but it seems stronger.I bought this case from Wilson Case. The dividers are made of whatever they use for their lightweight cases, and the outside is standard 1/2&quot; laminate.It took some serious design work to fit this many stands in this small of a footprint, but it works very well for me.</blockquote>

[QUOTE="Brian Adams, post: 124376, member: 963"] Re: Thoughts on a mic stand case They're just slotted together. There are no brackets or rivets or anything holding the dividers in place, since I didn't want anything in there to catch or scratch the stands. There's a slotted plywood surround in each of the big compartments to hold the edges, including the bottom, then the plastic sheets are slotted together, with the top slot being shorter to maximize strength at the top. I'm not sure exactly what the plastic is, it's kind of like Coroplast but it seems stronger. I bought this case from Wilson Case. The dividers are made of whatever they use for their lightweight cases, and the outside is standard 1/2" laminate. It took some serious design work to fit this many stands in this small of a footprint, but it works very well for me. [/QUOTE]

Verification