Reply to thread

Message

<blockquote data-quote="Chris Kmiec" data-source="post: 42222" data-attributes="member: 1188">Re: Turbosound FlashlineHi Bennett,I have registered to answer along side Dom, Just to answer a few of your questions (please let me know if I have missed any):- EASE Focus 2 will take into account temperature and humidity, these are set on the properties tab and as default are set to a standard room at 20C- The max SPL figures Dom quoted are the SPL figures based on distortion of the system rather than being based on the electrical rating of the driver. The figure quoted is the frequency which would show the lowest SPL in this measurement.- More high shelf is possible and driver selection was chosen so that proportionally the HF would be much higher due to this effect.Its great to be discussing this here after a few years of hard work by all involved on this project.Chris Application EngineerTurbosound</blockquote>

[QUOTE="Chris Kmiec, post: 42222, member: 1188"] Re: Turbosound Flashline Hi Bennett, I have registered to answer along side Dom, Just to answer a few of your questions (please let me know if I have missed any): - EASE Focus 2 will take into account temperature and humidity, these are set on the properties tab and as default are set to a standard room at 20C - The max SPL figures Dom quoted are the SPL figures based on distortion of the system rather than being based on the electrical rating of the driver. The figure quoted is the frequency which would show the lowest SPL in this measurement. - More high shelf is possible and driver selection was chosen so that proportionally the HF would be much higher due to this effect. Its great to be discussing this here after a few years of hard work by all involved on this project. Chris Application Engineer Turbosound [/QUOTE]

Verification