Reply to thread

Message

<blockquote data-quote="Todd Warnock" data-source="post: 138758" data-attributes="member: 9175">Re: X32, DCAs, Groups, etc.Jared - I think that makes sense!&nbsp; So - I need to remove channels 17-24 from the DCA group 3 and add MixBus 3 to the DCA group 3.&nbsp; Correct?Channels 15 and 16 are our pastor mics, and - while the band wants to hear what they have to say - they don&#039;t want to hear them when they forget to turn their packs off and start singing.&nbsp; So - when the board operator pulls the fader down, it kills it in the in ear.&nbsp; (I&#039;m open to a better way if there is one <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":-)" title="Smile&nbsp; &nbsp; :-)"&nbsp; data-smilie="1"data-shortname=":-)" /> )I don&#039;t understand the mixbus/aux question (vs subgroups).&nbsp; I don&#039;t want the P16 affected by any fader (except as I mentioned for 15 and 16.)&nbsp; What&#039;s the best (or recommended) way?Shane - thanks for the EQ tips.&nbsp; We&#039;re still learning this stuff.&nbsp; I&#039;ll try and digest what you&#039;re saying and I&#039;m sure I&#039;ll have questions.&nbsp; Group 4 and 5 are essentially &quot;not used&quot; right now.&nbsp; I had an idea, started to implement, and ran into this problem so I stopped.&nbsp; The suggestions though, will help as I go back to it...Thanks!</blockquote>

[QUOTE="Todd Warnock, post: 138758, member: 9175"] Re: X32, DCAs, Groups, etc. Jared - I think that makes sense! So - I need to remove channels 17-24 from the DCA group 3 and add MixBus 3 to the DCA group 3. Correct? Channels 15 and 16 are our pastor mics, and - while the band wants to hear what they have to say - they don't want to hear them when they forget to turn their packs off and start singing. So - when the board operator pulls the fader down, it kills it in the in ear. (I'm open to a better way if there is one :-) ) I don't understand the mixbus/aux question (vs subgroups). I don't want the P16 affected by any fader (except as I mentioned for 15 and 16.) What's the best (or recommended) way? Shane - thanks for the EQ tips. We're still learning this stuff. I'll try and digest what you're saying and I'm sure I'll have questions. Group 4 and 5 are essentially "not used" right now. I had an idea, started to implement, and ran into this problem so I stopped. The suggestions though, will help as I go back to it... Thanks! [/QUOTE]

Verification