Reply to thread

Message

<blockquote data-quote="Scott Bolt" data-source="post: 139329" data-attributes="member: 3950">Re: X32, DCAs, Groups, etc.Hi Todd,I modified your scene as follows:On &quot;Setup-&gt;Config&quot; screen, I changed your bus base setup to 8 pre fade, 0 subgroups, and 8 post fade mix busses.&nbsp; The 8 prefade (post eq) now have individual sends for each of the input channels you want to put into them.&nbsp; I set them to 0db by color code of the old subgroup labels you were using.&nbsp; You will have to adjust them to fit your needs.&nbsp; The easiest way to do this is to use &quot;sends on fader&quot;.&nbsp; If you then select the bus you want to adjust the inputs for, all the faders on the left will now indicate how much they are sending to the selected bus.&nbsp; This also works in reverse.&nbsp; If you select an input channel with &quot;sends on fader&quot; active, the bus faders will indicate how much send is on each of the busses for that single input.&nbsp; Play with it for a while and it will make more sense <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f609.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=";)" title="Wink&nbsp; &nbsp; ;)"&nbsp; data-smilie="2"data-shortname=";)" />I also labeled your efx busses (13, 14, 15) as Plate verb, room verb, and stereo dly.&nbsp; I put the bus returns all to 0db and using sends on fader, applied some plate verb to all vocals as well as a bit of delay.&nbsp; I put a little room verb on your snare.I didn&#039;t do anything to your P16 setup, but if you now do what you originally tried, I think you will find it does exactly what you thought it would do <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" />Let me know if you need any further help.[ATTACH]154188[/ATTACH]</blockquote>

[QUOTE="Scott Bolt, post: 139329, member: 3950"] Re: X32, DCAs, Groups, etc. Hi Todd, I modified your scene as follows: On "Setup->Config" screen, I changed your bus base setup to 8 pre fade, 0 subgroups, and 8 post fade mix busses. The 8 prefade (post eq) now have individual sends for each of the input channels you want to put into them. I set them to 0db by color code of the old subgroup labels you were using. You will have to adjust them to fit your needs. The easiest way to do this is to use "sends on fader". If you then select the bus you want to adjust the inputs for, all the faders on the left will now indicate how much they are sending to the selected bus. This also works in reverse. If you select an input channel with "sends on fader" active, the bus faders will indicate how much send is on each of the busses for that single input. Play with it for a while and it will make more sense ;) I also labeled your efx busses (13, 14, 15) as Plate verb, room verb, and stereo dly. I put the bus returns all to 0db and using sends on fader, applied some plate verb to all vocals as well as a bit of delay. I put a little room verb on your snare. I didn't do anything to your P16 setup, but if you now do what you originally tried, I think you will find it does exactly what you thought it would do :) Let me know if you need any further help. [ATTACH]154188.vB5-legacyid=12330[/ATTACH] [/QUOTE]

Verification