Reply to thread

Message

<blockquote data-quote="Chris Ludaescher" data-source="post: 84772" data-attributes="member: 3143">it is actually not Re: X32 track by track recording anymore....but another issue ;-)Has anybody checked, how many consoles have a noise issue on the monitor outputs? Mine does not have any noise there...only, when I want it to be noisy with something ;-).Anyhow, being on several forums, I am afraid that sometimes problems are a bit blown up. I mean, if there is a problem on a new console, it surely should be fixed by Behringer, and I have the impression they are very willing to do so. On the other hand there of course is no forum contribution from others only to tell that there is no noise or other problem on their console. Complaints with a reason should be taken seriously, but one should not conclude from many forum contributions by a few people about one problem, that there is a massive problem with monitor out noise.After having gone through several forums from the very first post to the current one, I could recall any problem (except for the wrongly routed cables inside) which has been a principle problem with the console. I finally decided and had one sent from Germany to Vietnam, together with a case and an S16...and I am perfectly happy with it. It will not see a lot of live usage, but quite a bit of studio ... the only problem I have is to come to grips with the relative complexity in comparison to my old Yamaha MG16 mixer and the two Phonic FireFly&#039;s I have been using....everything else is fine. I took a risk, because I am not aware of any service center in this part of the world.&nbsp; So far I am fine ;-)Don&#039;t get afraid of buying this mixer only because of a number of posts....check, how many people really HAVE that problem...then decide!CheersChris</blockquote>

[QUOTE="Chris Ludaescher, post: 84772, member: 3143"] it is actually not Re: X32 track by track recording anymore....but another issue ;-) Has anybody checked, how many consoles have a noise issue on the monitor outputs? Mine does not have any noise there...only, when I want it to be noisy with something ;-). Anyhow, being on several forums, I am afraid that sometimes problems are a bit blown up. I mean, if there is a problem on a new console, it surely should be fixed by Behringer, and I have the impression they are very willing to do so. On the other hand there of course is no forum contribution from others only to tell that there is no noise or other problem on their console. Complaints with a reason should be taken seriously, but one should not conclude from many forum contributions by a few people about one problem, that there is a massive problem with monitor out noise. After having gone through several forums from the very first post to the current one, I could recall any problem (except for the wrongly routed cables inside) which has been a principle problem with the console. I finally decided and had one sent from Germany to Vietnam, together with a case and an S16...and I am perfectly happy with it. It will not see a lot of live usage, but quite a bit of studio ... the only problem I have is to come to grips with the relative complexity in comparison to my old Yamaha MG16 mixer and the two Phonic FireFly's I have been using....everything else is fine. I took a risk, because I am not aware of any service center in this part of the world. So far I am fine ;-) Don't get afraid of buying this mixer only because of a number of posts....check, how many people really HAVE that problem...then decide! Cheers Chris [/QUOTE]

Verification