Reply to thread

Message

<blockquote data-quote="Chris Van Duker" data-source="post: 9529" data-attributes="member: 1113">All prices below are &quot;or best reasonable offer&quot;, shipping not included:Crown&nbsp; XTI 1002, fairly low usage, about 3 years old. Good condition with&nbsp; slight rack rash. Ships in original box. In Sacramento. Asking $350Audiopile&nbsp; 32x8, 150&#039; snake on a reel (RPPX-32x8-150), plus the case designed to&nbsp; fit it (RL-6060). Both are in good condition with minimal wear. In San&nbsp; Francisco. Asking $775 for both.Soundcraft Live 8, 32 channel&nbsp; mixer, plus a heavy-duty fiberglassed rolling case with a doghouse. Full&nbsp; LED meter bridge. Two issues, though: 1) The last channel strip is&nbsp; missing; and 2) Channels 6 and 7 are intermittent -- this may be&nbsp; something as simple as a dirty connection, but I haven&#039;t investigated&nbsp; it. ---the other 29 channels, and all other functions of the board work&nbsp; correctly. Located in San Francisco, Asking $750 for mixer, power&nbsp; supply, and case4x LABsubs. Two of them have braces which were&nbsp; epoxied in slightly crooked -- a cosmetic issue which does not affect&nbsp; performance. The need paint, and several drivers require a recone --&nbsp; I&#039;ll get into them in a day or so and see how many. Located in&nbsp; Sacramento. Asking $2000 for all four, with a $100 credit for each&nbsp; driver which requires a recone.</blockquote>

[QUOTE="Chris Van Duker, post: 9529, member: 1113"] All prices below are "or best reasonable offer", shipping not included: Crown XTI 1002, fairly low usage, about 3 years old. Good condition with slight rack rash. Ships in original box. In Sacramento. Asking $350 Audiopile 32x8, 150' snake on a reel (RPPX-32x8-150), plus the case designed to fit it (RL-6060). Both are in good condition with minimal wear. In San Francisco. Asking $775 for both. Soundcraft Live 8, 32 channel mixer, plus a heavy-duty fiberglassed rolling case with a doghouse. Full LED meter bridge. Two issues, though: 1) The last channel strip is missing; and 2) Channels 6 and 7 are intermittent -- this may be something as simple as a dirty connection, but I haven't investigated it. ---the other 29 channels, and all other functions of the board work correctly. Located in San Francisco, Asking $750 for mixer, power supply, and case 4x LABsubs. Two of them have braces which were epoxied in slightly crooked -- a cosmetic issue which does not affect performance. The need paint, and several drivers require a recone -- I'll get into them in a day or so and see how many. Located in Sacramento. Asking $2000 for all four, with a $100 credit for each driver which requires a recone. [/QUOTE]

Verification