Hi,
I'm setting up a pair of Yamaha 01V96 consoles to run in Cascade. The example setup in the manual uses ADAT connections - both on board and on ADAT slot cards - to move AUXs, BUSs, the stereo BUS and solo signals from the slave to the master console. The slave (transmitting) console becomes the clock master and the master (receiving) console sync's it's clock to either the slot or ADAT input.
Rather than using ADAT cards in the slots, I'd like to use MY16-AUD (Dante) cards but this raises a clocking question. As I understand with Dante, both consoles are clocking off the Dante network - their slots - and should be in lock step, however also connecting the on-board ADAT from slave to master consoles means that the ADAT link is running asynchronously and could potentially glitch.
Has anyone ever tried this?
Best,
Michael
I'm setting up a pair of Yamaha 01V96 consoles to run in Cascade. The example setup in the manual uses ADAT connections - both on board and on ADAT slot cards - to move AUXs, BUSs, the stereo BUS and solo signals from the slave to the master console. The slave (transmitting) console becomes the clock master and the master (receiving) console sync's it's clock to either the slot or ADAT input.
Rather than using ADAT cards in the slots, I'd like to use MY16-AUD (Dante) cards but this raises a clocking question. As I understand with Dante, both consoles are clocking off the Dante network - their slots - and should be in lock step, however also connecting the on-board ADAT from slave to master consoles means that the ADAT link is running asynchronously and could potentially glitch.
Has anyone ever tried this?
Best,
Michael
Last edited: