Normal
Re: Yorkville Ls801p (B) measurements.Could be. The Low cut looks like a standard 24db cut but the High Cut looks to be some kind of stagger pole design. Starts off with a single 12db then another one seems to comes in higher up for a steeper slope at the end. Not sure why they did this. I do know the EF500p tops I use combine with them fine and have what looks like a 100hz 24db cut in them. Next time I have a chance to measure them I'll spin the High Cut knob and see if it stays the same in all frequency settings.Douglas R. Allen
Re: Yorkville Ls801p (B) measurements.
Could be. The Low cut looks like a standard 24db cut but the High Cut looks to be some kind of stagger pole design. Starts off with a single 12db then another one seems to comes in higher up for a steeper slope at the end. Not sure why they did this. I do know the EF500p tops I use combine with them fine and have what looks like a 100hz 24db cut in them. Next time I have a chance to measure them I'll spin the High Cut knob and see if it stays the same in all frequency settings.
Douglas R. Allen
