Complete professional Yorkville TX-series Front-Of-House speaker system. All equipment is used, but in excellent shape and ready for your next show. Everything you need is included…just give it power and a signal from your mixer and you’re ready to go. The system is easily scalable for different sized or multiple events. Easy to use 1, 2, or 3 per side…or split up into 3 smaller but very capable systems. Each amplifier rack has its own processor and powers one pair of the tops and one pair of the subs. Racks have patch panels on rear with all necessary Speakon, XLR, and power connectors. This system is fairly efficient. Each rack can run full tilt (to processor limit) off of a single L14-20 circuit without tripping breakers
Includes:
6 TX8 – 3 way, all horn-loaded, with fly-track. 2x15”, 1x8”, 1-2” all B&C Loaded.
6 TX9S – 2x18” subwoofer. w/ wheels. B&C Loaded
3 EWI R14U amp racks. Each contains:
1 Yorkville TX8P cabinet specific 4-way processor.
4 QSC RMX1450 (1 stereo on HF, 1 stereo on MF, 2 bridged on LF, 1 per cab)
2 QSC RMX2450 (1 bridged per sub)
Patch Panel w/ 2 NL8 for mains, 2 NL4 for subs, 2 XLR-f, 1 AC inlet L14-20)
2 50’ Speaker Cables w/ 8-cond wire NL8-NL8 (allows for jumping from main to sub for smaller setups)
4 50’ Speaker Cables w/ 6-cond wire NL8-NL8 (3-way to tops, but no jump to subs)
6 50’ Speaker Cables 2-12awg for subwoofers
3 20’ 4-12awg power cables w/ L14-20
A few misc XLR adapters/Y-cables for hooking racks together, etc.
Several flytrack fittings w/ shackles
This is basically a turnkey system.
We would prefer to sell as a whole system for $33,000, but will consider splitting up into seperate rigs (two tops, two subs, rack, cables) for $12,000/ea. Of course, any reasonable offers will be considered.
I will try to get around to posting pics soon. PM me before then and I can email them to you.
Equipment in located in MI zip 49014.
Includes:
6 TX8 – 3 way, all horn-loaded, with fly-track. 2x15”, 1x8”, 1-2” all B&C Loaded.
6 TX9S – 2x18” subwoofer. w/ wheels. B&C Loaded
3 EWI R14U amp racks. Each contains:
1 Yorkville TX8P cabinet specific 4-way processor.
4 QSC RMX1450 (1 stereo on HF, 1 stereo on MF, 2 bridged on LF, 1 per cab)
2 QSC RMX2450 (1 bridged per sub)
Patch Panel w/ 2 NL8 for mains, 2 NL4 for subs, 2 XLR-f, 1 AC inlet L14-20)
2 50’ Speaker Cables w/ 8-cond wire NL8-NL8 (allows for jumping from main to sub for smaller setups)
4 50’ Speaker Cables w/ 6-cond wire NL8-NL8 (3-way to tops, but no jump to subs)
6 50’ Speaker Cables 2-12awg for subwoofers
3 20’ 4-12awg power cables w/ L14-20
A few misc XLR adapters/Y-cables for hooking racks together, etc.
Several flytrack fittings w/ shackles
This is basically a turnkey system.
We would prefer to sell as a whole system for $33,000, but will consider splitting up into seperate rigs (two tops, two subs, rack, cables) for $12,000/ea. Of course, any reasonable offers will be considered.
I will try to get around to posting pics soon. PM me before then and I can email them to you.
Equipment in located in MI zip 49014.