MountainCrest Communications, Author at Sound Forums

134 POSTS 0 COMMENTS

http://www.mountaincrest.net

Producer / Engineer Sylvia Massy’s Production Thrives with Mojave Audio Microphones

MountainCrest Communications - October 1, 2019

12 3...14 Page 1 of 14

Join the Discussion

60 Degree DIY Mid Hi November 14, 2019
Hi Everyone, I have started work on the 60 degree version. Don has helped once again and provided some preliminary CAD drawings. A bit of work is still needed to simplify the construction and finalize the dimensions. The original DIY was a prototype designed to test the design and concept; this time I’m planning to […]
My DIY projects "J&N" November 13, 2019
Hello, A model of my DIY loudspeakers i have served Ti6k- JBL. My first contact with them, was in distant 2005. I started working with them in 2009 and finished in 2012. The loudspeakers are "SEAS"- Excel / Tw-1”, Mw-5”for center 2? 5.5”,Bass-8,5”/ and cross-over parts- "Intertechnik". Nominal impedance- 8 OhFreguency Range 30Hz-20kHzCharacterstic Sensitivity(2,83V/1m)- 87db […]
PM 60 & 90 settings and alternative drivers. November 13, 2019
I have had a lot of requests for settings and alternative drivers that are a little cheaper. When I have a bit of free time I will post up my Lake LM26 settings. Unfortunately I only have Lake processing and there can be a lot of variation between different processors with the same settings - […]
New DIY Mid High (90deg) November 12, 2019
Specifications (best guess) 90 x 50 horn pattern 100Hz – 20KHz +/- 1.5dB approx. Ignore the frequency response below about 400Hz. I don’t have a decent space to measure this speaker in. There was also a double 18 used below 100Hz Weight - 32Kgs Size - 930-H x430-D x 385-W mm Low Mid 100Hz – […]
Carvin Line Array? November 10, 2019
A local acquaintance has aquired 8 of these for use above 6 Yorkville UCS subs. I have only heard them straight stacked on top of the subs and 2/side on poles above subs. Carbon processor with stock settings I assume. The seemed very peaky at certain high frequencies but that could just be a taste […]
AV as a managed services November 9, 2019
Have any of you worked in a setting where your relationship with a client began with an installation project but continued longterm for event support? I'm looking into the viability of pitching AV installation/design services as part of a "you don't have to worry about any aspect of technology operations in your [non-technology focused] business" […]

MountainCrest Communications

Advertisement