Recent content by Jake Mathew

Thank you for the advise. I turned off the EQ and GEQ on the stereo bus and there was a slight improvement. Then I brought down the compressor threshold to -6 and that made a considerable difference. Now the cue on the stereo is same as the individual keyboard and other channels. Consider this...

David, there are no effects (inserts) on. As for other inputs after looking through all I kind off figured there are two stereo or usb ( same channel) and effects (total 8) that go to the output and these are all off. There are no sub groups setup or matrices setup in omnibus to stereo out.

on the stereo out EQ: slight boost by +4 on low end up to100Hz, +2 on 4K and +2 at 15KHz that's it Compressor settings: Threshold -13 ratio 3.5:1, attack 25 ms, release 309ms, Outgain +3.0 Knee Med There are no Inserts.

When listening to the keyboard via head phones on that channel cue it is very clear and all mids are clear. However when listening to the stereo cue it is kind of muffled or should I say subdued especially on the mids. The same output comes out through the house speakers. Why are these two...