Recent content by Jaroslav Mikyska

My new version for biamp with pasive crossover C16. http://mikesound.com/stavba/MB-21014KXH/21014xxxxx_iNukexx000DSP_V9.0.xlsx

Hi, due to the high power of the amplifiers I use a 16 ohm version of BMS 4594HE and with horn RCF HF950. The settings for this version with the inuke 6000D amplifier can be downloaded from their website, link here. version with original passive crossover BMS C16...

Hi Sal, I also use 90, and I'll play all my events with it. Jarda Mike

OK, thanks Max Jaroslav Mikyska

Hello Peter, a friend wants to build a PM90 box and asks if they would be suitable for the box and could use 18sound 12ND610 speakers? Thank you for answer.

I haven't measured the tuning yet, basreflexes are only tuned in order to keep the box as low as possible. Because the box in fulrange mode is used only exceptionally and at low power, there is basically no need for it. With standard use of compact boxes with subwoofers at crossover frequency...

What volume the horn and driver have, I don't know. I have basreflex ports inside the box, diameter 50mm, length 80mm. This is indicated by dashed lines on the drawing.

Kristoffer: Thanks for the praise. ? Peter: I am so excited about the mini bass boxes that I decided to build 12 pieces and use them for larger events. I needed to try out this mini system with 4pcs of bass boxes, so I used it to sound the student event in the square. At a distance of 20 m...

Just for the sake of interest. I built 12 "bass boxes to small 2x10 boxes according to the construction instructions from 18Sound, I am very pleased with them. Photo from the building here. http://www.mikesound.com/stavba/MB-112BP/mb112bp.htm

Nice Cat ?

Hi, I chose the loudspeakers only to reduce the size of the box. I would say that the directionality does not have an effect, but it has a great impact on the sound color. it has a big gain around 300Hz and it has to be solved by using PEQ in the sound processor. I do not measure the...

Hi Max I prefer metal handles, for better handling when lifting a high tripod.

Here are my drawings. Jarda Mike

Hello Peter, the inspiration for me was box eaw KF394, according to the parameters of the HF system, maybe we used our favorite BMS driver. In the pdf manual there is also a ceiling in the box, so I tried it somehow similarly :-)...

Hello, I am thrilled with the sound of the BMS 4594HE driver combined with the HF950 horn, used in the Peter Morris design PM 90, which I built and decided to build a small box with 2x10 "speakers, here's the construction. http://www.mikesound.com/stavba/MB-21014KXH/mb21014kxh.htm I'm waiting...