Search results for query: *

Update: Issue resolved. It was a bad mic. I mentioned swapping out the mic in my initial post and it didn't help. It was a different type of mic, an over-the-ear mic and I did not set it up properly so the noise issue was still there. Anyway, the new mic, WL184, works perfectly.

We have used this transmitter for years without issues - it has been a great mic. But a week or so ago it dropped volume dramatically one night (from when it was turned on, not in the middle of service). I have had to increase the gain on the receiver from +12 to +20 to get it back in the...

(y) Thank you.

http://azprosound.com/

Thank you, Rob. That PDF is very good. Thank you, Mike. I will wire it up balanced. We are in the sticks, 2 hours from a big city so my "pro" options are very limited. It's either the guys I brought in or see what it would cost to get someone from Tucson, 2 hours away. $$$ BTW, what...

For a short unbalanced run, it would be okay If the cable is just the one wire and a shield? The X32 is maybe five feet away from the amp (although the cable is about 10'). If you were going to redo this would you run a balanced connection to be on the safe side? Also, would you first connect...

Thank you, Mike. Correct me please, but a balanced line is 3 conductors, one of which is ground, and the other two are feed/return conductors. Right? So coming out of our X32 is likely an XLR balanced line connection - 3 conductors (I don't have the X32 in front of me to check). But...

Thank you, Riley. These are great tips. Just what I was hoping to find here.

Thank you, Riley. Do you know where I can go to learn how to do the terminations properly? And how to clean and filter the amp? I will definitely try rotating it quickly back and forth. What worries me about stripped wire type of connections is that the bare wire at the connection is exposed...

I have an X32 outputting to the QSC. What has been happening is that the main left speaker cuts out frequently, or never comes on at all. This has been going on for a few months. We had some sound pros come in and they maxed the QSC output controls and said that is how they run theirs and...