Search results for query: *

A great many sound systems are configured with a separate feed from the mixer to the subwoofers in much the same way that each monitor mix is sent separately. This allows the sound mixer to emphasis bass elements of the mix with a single fader when needed. It also allows the engineer to...

VMware for Mac is free now just requiring an installable copy of Windoze to run. Pretty handy thing to have on a Mac for a variety of things. That said the editor software isn't quite as good an introduction to the DigiCo surface as say the Yamaha editors are for Yamaha consoles. Still the...

You can't unzip it?

"important switch" 😏 I would have spent a good 15 minutes troubleshooting that if I'd been dropped in to mix on one of those. Not a bad feature but I sure hope it has an angry red blinking light when engaged.

The Soundcrafts remote control functionality are not noted for being very robust. That said you may have better luck with the Mixing Station app but even there the Soundcrafts don't get high marks.

In the face of inexplicable problems its never a bad idea to unmate and remate any PCB connectors several times and inspect the board for jumpers or socketed ICs ( very rare these days )

Oh boy China knock off diaphragms, fun stuff. Just gonna leave this here.

Lots of Youtube videos can walk you thru these questions better than explanations on a forum like this but one thing that makes everything easier on the X32/M32 platform is to configure the console with a computer control app like that provided by Behringer or the Mixing Station app. The console...

The cake and eat it too solution to all of this is to do your scene management on a computer or iPad. Pull the scene or scenes from the console you think might be the best starting place and adjust from there or start from scratch either way you're up and running without making changes to the...

I've never seen or touched an M5000 but your question is more likely a computer OS question. Have you installed the appropriate driver for your computer from the Roland site?

What metronome does an X32 have ?

Not a video guy at all but I'm curious if this depends on the type of file that is being feed to the convertor. I do know that compressed files are strongly discouraged in audio playback systems as the computers may not be able to decode fast enough to read the cues.

Contact KEF and ask if they make recone kits for these drivers and also ask if they can recommend a reconing shop. Speaker reconing while fairly easy does require training. Watch a Youtube video or two and see if you want to try it on your own. Keep in mind that every speaker model is different...

The set screw in the plastic connector body has backed down from the connector housing in the bottom of the mic. Turn the set screw so that its fully recessed into the plastic connector body. Connect a female XLR to the male pins of the connector now presumably hanging by tiny wires and line up...

A differential drive pair of opamps does not a transformer make.

Clearcom Freespeak is very popular & very expensive. Clearcom wired comm is the defacto standard although 'Pro Intercom' makes a compatible lower cost version. At least in corporate its a mix of wired & wireless.

Did someone miss the memo that the inter webs are international?

That would depend to a large extent on what an RS-2 is.

Very few people in the early 80s at least bought complete a PA suitable for any particular venue. Bands in particular might play a 200 seat bar one night, a 2000 person college gym the next night and a show in the park the next night. They also acquired gear as budget and needs arose rather than...

Yup