Reply to thread

Message

<blockquote data-quote="John DiNicola" data-source="post: 116927" data-attributes="member: 2061">Re: Behringer X32 + 2x S16 huge problemDear Steve,You are correct that we recommend having the X32 set as the master sync. When doing so, the S16 sample rate does not need to be set as it will follow the X32. The most common configuration is to have the first S16 in “Mode 1” and the second in “Mode 2”, as described on page 9 of the manual which you can find here: <a href="http://www.behringer.com/assets/S16_M_EN.pdf" target="_blank">http://www.behringer.com/assets/S16_M_EN.pdf</a>As has been stated here, we do recommend using shielded CAT5e with locking Ethercon ends. Be sure you are connecting to AES50(A) on the first S16. If you are still not getting sync, you may try using the other AES50 port on the X32. If you need any further assistance, please contact our CARE department at <a href="mailto:CARE@music-group.com">CARE@music-group.com</a> or send me a message here so we can help.</blockquote>

[QUOTE="John DiNicola, post: 116927, member: 2061"] Re: Behringer X32 + 2x S16 huge problem [FONT=Helvetica]Dear Steve,[/FONT] [FONT=Helvetica]You are correct that we recommend having the X32 set as the master sync. When doing so, the S16 sample rate does not need to be set as it will follow the X32. The most common configuration is to have the first S16 in “Mode 1” and the second in “Mode 2”, as described on page 9 of the manual which you can find here: [url]http://www.behringer.com/assets/S16_M_EN.pdf[/url][/FONT] [FONT=Helvetica] [/FONT] [FONT=Helvetica]As has been stated here, we do recommend using shielded CAT5e with locking Ethercon ends. Be sure you are connecting to AES50(A) on the first S16. If you are still not getting sync, you may try using the other AES50 port on the X32. If you need any further assistance, please contact our CARE department at [email]CARE@music-group.com[/email] or send me a message here so we can help.[/FONT] [/QUOTE]

Verification