Reply to thread

Message

<blockquote data-quote="Antoon van den Oetelaar" data-source="post: 133427" data-attributes="member: 3005">Re: Behringer X32 Firmware v3.0 Feature RequestsNot a good idee I think, it will be much easier to make an internal feedback, for some it&#039;s allready to tricky at the moment...But I second the proposal, of the x32rack as a stagebox and as a monitor mixer. It&#039;s so easy to adjust it with a tablet.The price difference is very small comparing a S16 with a X32 rack.If you&#039;re afraid of losing wifi (use a dual band!!), I would also suggest to have a second cat5, and place the wifi at FOH, that would make it a lot more robust. Also you can connect both X32&#039;s to the same wifi. <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" />You can use a compressor as a insert on the bus I think? Or rout the bus internal to a input channel, (Select the buss on the input selector of the channel) use the channel compressor, and insert the effect on the channel, send the output of that channel only to LR, or monitor busses, not to effectbusses.Sometimes I use this for backing vocals to have a group compressor, without eating effect slots.</blockquote>

[QUOTE="Antoon van den Oetelaar, post: 133427, member: 3005"] Re: Behringer X32 Firmware v3.0 Feature Requests Not a good idee I think, it will be much easier to make an internal feedback, for some it's allready to tricky at the moment... But I second the proposal, of the x32rack as a stagebox and as a monitor mixer. It's so easy to adjust it with a tablet. The price difference is very small comparing a S16 with a X32 rack. If you're afraid of losing wifi (use a dual band!!), I would also suggest to have a second cat5, and place the wifi at FOH, that would make it a lot more robust. Also you can connect both X32's to the same wifi. :) You can use a compressor as a insert on the bus I think? Or rout the bus internal to a input channel, (Select the buss on the input selector of the channel) use the channel compressor, and insert the effect on the channel, send the output of that channel only to LR, or monitor busses, not to effectbusses. Sometimes I use this for backing vocals to have a group compressor, without eating effect slots. [/QUOTE]

Verification