Reply to thread

Message

<blockquote data-quote="Timo Ulkuniemi" data-source="post: 137897" data-attributes="member: 1978">Re: Behringer X32 Firmware v3.0 Feature RequestsGrüetziIn this case - you only need that function for choir microphones - suggestionFirst use i.e. BUS 1 for altos - BUS 2 for tenors - and so forth - one BUS for each voice-group - use these BUSes as monitor sends - pre-fade - and route them all to MATRIX 1You will have to assign the MATRIX 1 output to get sound out - other monitor groups can be assigned directly via respective BUSesAssign&nbsp; each voice-group BUS into a DCA - 1-2 - 2-2 3-3 etc - now you have a DCA for each voice-group MONITOR - NOT affecting your house mix.Naturally this will eat buses and DCA´s - but I imagine you should have enough - after all you can have 12 monitor buses + 4 effects at once. This is without using subgroups - but there you should have 4 DCA´s left over for rest of the bandp.s.&nbsp; nothing wrong with your english&nbsp; <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" />~<img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":-)" title="Smile&nbsp; &nbsp; :-)"&nbsp; data-smilie="1"data-shortname=":-)" />~:smile:</blockquote>

[QUOTE="Timo Ulkuniemi, post: 137897, member: 1978"] Re: Behringer X32 Firmware v3.0 Feature Requests Grüetzi In this case - you only need that function for choir microphones - suggestion First use i.e. BUS 1 for altos - BUS 2 for tenors - and so forth - one BUS for each voice-group - use these BUSes as monitor sends - pre-fade - and route them all to MATRIX 1 You will have to assign the MATRIX 1 output to get sound out - other monitor groups can be assigned directly via respective BUSes Assign each voice-group BUS into a DCA - 1-2 - 2-2 3-3 etc - now you have a DCA for each voice-group MONITOR - NOT affecting your house mix. Naturally this will eat buses and DCA´s - but I imagine you should have enough - after all you can have 12 monitor buses + 4 effects at once. This is without using subgroups - but there you should have 4 DCA´s left over for rest of the band p.s. nothing wrong with your english :)~:-)~:smile: [/QUOTE]

Verification