Reply to thread

Message

<blockquote data-quote="Clayton Fernandes" data-source="post: 147233" data-attributes="member: 2032">Re: Behringer X32 Firmware v3.0 Feature Requestsin ENGLISH:Behringer, see my suggestions, I believe each is enormous competitive advantage for you:1- allowing each channel to work with slots for processing (as with the daw where you choose which processing or in each slot), and this concept everything fx and gate, compressor, eq for each channel have all to be in a site available to be called on each channel or bus.2- allow autonomous recording directly from the USB port of the S16 and S32.3- firmware allow connection x32core unit (several cascade) in other x32 to enlarge power DSP (not just adding 8FX, but much more because we have all the DSP dedicated to processing by channels that are free and can be dedicated to enter a much larger number of fx in the mixture).4- improve the aesthetics of fx because many have to resolve interface.5- create an x32 surface or core surface, which would basically encoders and LCD fades and without the analog inputs (or with only 8in and 8outs), perhaps even without the integrated DSP.</blockquote>

[QUOTE="Clayton Fernandes, post: 147233, member: 2032"] Re: Behringer X32 Firmware v3.0 Feature Requests in ENGLISH: Behringer, see my suggestions, I believe each is enormous competitive advantage for you: 1- allowing each channel to work with slots for processing (as with the daw where you choose which processing or in each slot), and this concept everything fx and gate, compressor, eq for each channel have all to be in a site available to be called on each channel or bus. 2- allow autonomous recording directly from the USB port of the S16 and S32. 3- firmware allow connection x32core unit (several cascade) in other x32 to enlarge power DSP (not just adding 8FX, but much more because we have all the DSP dedicated to processing by channels that are free and can be dedicated to enter a much larger number of fx in the mixture). 4- improve the aesthetics of fx because many have to resolve interface. 5- create an x32 surface or core surface, which would basically encoders and LCD fades and without the analog inputs (or with only 8in and 8outs), perhaps even without the integrated DSP. [/QUOTE]

Verification