Reply to thread

Message

<blockquote data-quote="Craig Wright" data-source="post: 148526" data-attributes="member: 10645">Re: Behringer X32 Firmware v3.0 Feature RequestsHi. Just finished off a Midas support ticket, apparently this is the official way to suggest features for X32 and M32 series consoles.X/M32 iPad app suggestion: &#039;Mix Select&#039; when selecting a mix in sends-on-fader mode. Situation: X32 Rack with an iPad at side of stage for monitor duties (small number of mixes, but a demanding band), engineer has a listen system. Can solo mixes (fine), but if one is listening to mix 1 and a change is requested in mix 3, one must hit six buttons to listen to the mix that one is adjusting send levels for. The &#039;Solo follows select&#039; option has no effect, as these mixes are not &#039;selected&#039; when put into sends-on-fader.Solo bus suggestion: If a band is all on IEMs, the monitor engineer will spend their whole gig with their ears plugged. It would be very useful to either allow the solo bus to be sent to a matrix (to allow mixing of FoH&#039;s shout system into the matrix feeding the monitor engineer&#039;s listen system). Alternatively, a feature from the PRO series could be implemented - basically, allow injection of an external &#039;always on&#039; noise source (i.e, FoH shout to mons) into the monitor path.</blockquote>

[QUOTE="Craig Wright, post: 148526, member: 10645"] Re: Behringer X32 Firmware v3.0 Feature Requests Hi. Just finished off a Midas support ticket, apparently this is the official way to suggest features for X32 and M32 series consoles. X/M32 iPad app suggestion: 'Mix Select' when selecting a mix in sends-on-fader mode. Situation: X32 Rack with an iPad at side of stage for monitor duties (small number of mixes, but a demanding band), engineer has a listen system. Can solo mixes (fine), but if one is listening to mix 1 and a change is requested in mix 3, one must hit six buttons to listen to the mix that one is adjusting send levels for. The 'Solo follows select' option has no effect, as these mixes are not 'selected' when put into sends-on-fader. Solo bus suggestion: If a band is all on IEMs, the monitor engineer will spend their whole gig with their ears plugged. It would be very useful to either allow the solo bus to be sent to a matrix (to allow mixing of FoH's shout system into the matrix feeding the monitor engineer's listen system). Alternatively, a feature from the PRO series could be implemented - basically, allow injection of an external 'always on' noise source (i.e, FoH shout to mons) into the monitor path. [/QUOTE]

Verification