Re: New Power Amplifiers??
Okay, so looking at the pink noise spec. on the MA5k it seems like (2) of those would draw considerably less AC power then my current amplifiers.
The MA5k is 7.8a @ 4ohm
My current RMX4050hd is 10a @ 4ohm
That would replace my current sub amp.
A second MA5k would be operating at 8ohms, that specs. out at 5.3a
I don't have a spec. for my current PLX3402 it would replace, put at 4ohms it specs. at 12a (i would guess at 8ohms it would be about 8-9a?)
If all that is correct I should have no problem operating my system off of (1) circuit, because what I have currently has done it without issues for the past 3-years.
