2 Kevlar foam core neo motor midrange I made.
1 dual VC epoxy filled 15in speaker with Fe motor. About the same as new B&C 15in output minus the below 40Hz.
CDX3050 on custom horn.
Should be good crossed from 40-80 up with a subbass system to make full range but the sensitivity is at least 100db right now (maybe more). The Kevlar 8's are 5g cone weight. I made 10in which passed breaking in of 4hrs which was 8g. Sphericals show they both work to around 1300+Hz which is good.
Makes a pretty good 3-way minus the sub-bass. I should note the boxes are just random. The mid-high box is ported for 60 Hz with some High-BL 8in speakers but the mids aren't operating in that range.
PS. Images show 10in in a moded box to be sealed. A 70 thou gap 1.1T magnet and a 67 thou gap fenalic 1.6T magnet which delivers ~34Txm to the speaker.
1 dual VC epoxy filled 15in speaker with Fe motor. About the same as new B&C 15in output minus the below 40Hz.
CDX3050 on custom horn.
Should be good crossed from 40-80 up with a subbass system to make full range but the sensitivity is at least 100db right now (maybe more). The Kevlar 8's are 5g cone weight. I made 10in which passed breaking in of 4hrs which was 8g. Sphericals show they both work to around 1300+Hz which is good.
Makes a pretty good 3-way minus the sub-bass. I should note the boxes are just random. The mid-high box is ported for 60 Hz with some High-BL 8in speakers but the mids aren't operating in that range.
PS. Images show 10in in a moded box to be sealed. A 70 thou gap 1.1T magnet and a 67 thou gap fenalic 1.6T magnet which delivers ~34Txm to the speaker.
Attachments
Last edited: