Hi,
I regularly do outdoor events where I fly 4 x ~25kg cabinets at about 4 to 5 metres high using rented truss spanned between a rented pair of VMB Towerlifts.
I just purchased a pair of Clair R4 mark III's and at 122kg (268 lbs) each, they're a significant jump in weight. I've calculated that the truss and Towerlifts can handle these, but rather than renting, I'd like to have something myself.
The VMB's are >$3000 each here in Australia. Does anyone have any safe but low to moderately expensive ideas for raising the R4's easily off the ground? Something that doesn't take too long to assemble. (Sometimes 1.5 metres is enough. Other times I need 5m.)
Best,
Michael
I regularly do outdoor events where I fly 4 x ~25kg cabinets at about 4 to 5 metres high using rented truss spanned between a rented pair of VMB Towerlifts.
I just purchased a pair of Clair R4 mark III's and at 122kg (268 lbs) each, they're a significant jump in weight. I've calculated that the truss and Towerlifts can handle these, but rather than renting, I'd like to have something myself.
The VMB's are >$3000 each here in Australia. Does anyone have any safe but low to moderately expensive ideas for raising the R4's easily off the ground? Something that doesn't take too long to assemble. (Sometimes 1.5 metres is enough. Other times I need 5m.)
Best,
Michael