Reply to thread

Message: <blockquote data-quote="Riley Casey" data-source="post: 205847" data-attributes="member: 125"><p>If you're building new cases you just have to measure the truck boxes you're likely to be using - including any kick boards.  Plenty of 96" wide trucks in the US have 1" wide by 15" high kick boards around the bottom of the  box perimeter.  The smallest dimension that will meet a case corner is what counts.  Also keep in mind where the E tracks are for the load bars.  If your standard case height is 30" including castors and most of the rental trucks you get have the E track at 36" off the floor you're going to have to waste a lot of time coming up with workable packs day in and day out.</p></blockquote><p></p>

Top Bottom