Reply to thread

Message

<blockquote data-quote="Robert Goldberg" data-source="post: 100715" data-attributes="member: 5161">Re: Master/Slave X32 with X32 CompactOK, I&#039;ve been playing with Tracktion a little and I am starting to get the hang of it (slightly). I downloaded a sample multitrack recording and I am working to get it playing correctly using my laptop and the Card USB interface.However, I am seeing something that looks like it may be a problem. I am hoping not but need to ask you all.I am using the default bus assignments for effects. Presently I am using Effect 1 and 2. The first effect uses Bus 13 and I only have vocal channels using that bus (for vocal reverb). The second effect uses Bus 14 and I use that as an instrument reverb. I only have two drum channels set to use it. However, whenever I run something through the board such as music from my phone into the AUX channels or Tracktion 4 files, I always see a small amount of activity on Bus 14 and if I solo that bus I hear (faintly) some music coming from it. I have checked all of my faders to make sure nothing is up just enough to make this happen. I seem to have all faders down all the way except for the two I want on that bus. Yet still I will play something that is only coming in on two input channels not set to send to that bus and still I will see a small amount of activity on that bus. My Effect 1 is Plate Reverb and my Effect 2 is Vintage Reverb.Any possible explanation for this besides something is wrong with my X32? I really don&#039;t want anything to be wrong with it. I know, who does, it&#039;s just that its brand new and am having enough issues getting up to speed with it without it having issues of its own. I want all the issues to be mine, not the board&#039;s :-(</blockquote>

[QUOTE="Robert Goldberg, post: 100715, member: 5161"] Re: Master/Slave X32 with X32 Compact OK, I've been playing with Tracktion a little and I am starting to get the hang of it (slightly). I downloaded a sample multitrack recording and I am working to get it playing correctly using my laptop and the Card USB interface. However, I am seeing something that looks like it may be a problem. I am hoping not but need to ask you all. I am using the default bus assignments for effects. Presently I am using Effect 1 and 2. The first effect uses Bus 13 and I only have vocal channels using that bus (for vocal reverb). The second effect uses Bus 14 and I use that as an instrument reverb. I only have two drum channels set to use it. However, whenever I run something through the board such as music from my phone into the AUX channels or Tracktion 4 files, I always see a small amount of activity on Bus 14 and if I solo that bus I hear (faintly) some music coming from it. I have checked all of my faders to make sure nothing is up just enough to make this happen. I seem to have all faders down all the way except for the two I want on that bus. Yet still I will play something that is only coming in on two input channels not set to send to that bus and still I will see a small amount of activity on that bus. My Effect 1 is Plate Reverb and my Effect 2 is Vintage Reverb. Any possible explanation for this besides something is wrong with my X32? I really don't want anything to be wrong with it. I know, who does, it's just that its brand new and am having enough issues getting up to speed with it without it having issues of its own. I want all the issues to be mine, not the board's :-( [/QUOTE]

Verification