Reply to thread

Message

<blockquote data-quote="Mark Skyrme" data-source="post: 105460" data-attributes="member: 2528">Re: X32 Slave mode would be a cool featureHere&#039;s one for Per to confirm I think!.....In light of the trim changes +-18db in the latest firmware, I&#039;ve been changing my sync link app for 2 x32s to sync together (considering it recently broke this bit!)I think I am right in working out the updated code for gain v trim.........IF (Gain&lt;-2.0) THEN ADGain = -8.0, ELSEIF (Gain&lt;48.0) THEN ADGain = -0.5+2.5*INT((Gain-6.5)/2.5)ELSE ADGain=39.5END IFTrim=Gain - ADGainIt seems to match my spreadsheet. I&#039;ve been using the synclink app on several shows now.&nbsp; It&#039;s been brilliant to enable complete remote control of the main console from the middle of the auditorium using a second x32. Still working on a few little bits.&nbsp; Assume it&#039;ll work just the same if you&#039;ve got an x32 rack and want to control everything from an x32 desk.</blockquote>

[QUOTE="Mark Skyrme, post: 105460, member: 2528"] Re: X32 Slave mode would be a cool feature Here's one for Per to confirm I think!..... In light of the trim changes +-18db in the latest firmware, I've been changing my sync link app for 2 x32s to sync together (considering it recently broke this bit!) I think I am right in working out the updated code for gain v trim......... IF (Gain<-2.0) THEN ADGain = -8.0, ELSEIF (Gain<48.0) THEN ADGain = -0.5+2.5*INT((Gain-6.5)/2.5) ELSE ADGain=39.5 END IF Trim=Gain - ADGain It seems to match my spreadsheet. I've been using the synclink app on several shows now. It's been brilliant to enable complete remote control of the main console from the middle of the auditorium using a second x32. Still working on a few little bits. Assume it'll work just the same if you've got an x32 rack and want to control everything from an x32 desk. [/QUOTE]

Verification