Reply to thread

Message

<blockquote data-quote="Jan Duwe" data-source="post: 106216" data-attributes="member: 2624">Re: X32 Networking CardsDear Chris,The X32 expansion slot offers 32x32 channel I/O for whatever outboard&nbsp; processing you may wish to apply. (...compare to your Y.LS9 slot, which&nbsp; allows only 16x16...) Afaik, the Dugan would work on 8...max.16 channels, only.OPTION 1You can assign the X32&#039;s direct ouputs of the local preamps directly to the card outs:--&gt; Routing/card out &gt; Output 1-32 = Local Out 1-32This works independent from the input channel processing, so you don&#039;t need to put any local inputs on any channel at all. You may also use stagebox signals via AES50, if you prefer. Note, however, whenever preamps aren&#039;t patched to input channels, their phantom and gain settings need to be controlled from the Setup/preamps page, only.You can then return the card inputs to the channel inputs:--&gt; Routing/home &gt; Input 1-32 = Card In 1-32OPTION 2If 16 channels of outboard processing (i.e. for your Dugan automixer) is enough, and you prefer having control over the exact insert point for processing, then you may patch the preamps (local or AES50) to some unused channel layers, say 17-32.--&gt; Routing/home &gt; Input 1-16 = Card In 1-16, Input 17-32 = Local In 1-16--&gt; Routing/P16 &gt; P16 channel 1-16 = Direct Out ch 17-32, select the signal tap as needed--&gt; Routing/card out &gt; Output 1-16 = P16 channel 1-16This way you got full control over the insert point, and you can apply channel processing and even have separate faders prior and after your external automixing control...Hope that helps.Best,Jan</blockquote>

[QUOTE="Jan Duwe, post: 106216, member: 2624"] Re: X32 Networking Cards Dear Chris, The X32 expansion slot offers 32x32 channel I/O for whatever outboard processing you may wish to apply. (...compare to your Y.LS9 slot, which allows only 16x16...) Afaik, the Dugan would work on 8...max.16 channels, only. OPTION 1 You can assign the X32's direct ouputs of the local preamps directly to the card outs: --> Routing/card out > Output 1-32 = Local Out 1-32 This works independent from the input channel processing, so you don't need to put any local inputs on any channel at all. You may also use stagebox signals via AES50, if you prefer. Note, however, whenever preamps aren't patched to input channels, their phantom and gain settings need to be controlled from the Setup/preamps page, only. You can then return the card inputs to the channel inputs: --> Routing/home > Input 1-32 = Card In 1-32 OPTION 2 If 16 channels of outboard processing (i.e. for your Dugan automixer) is enough, and you prefer having control over the exact insert point for processing, then you may patch the preamps (local or AES50) to some unused channel layers, say 17-32. --> Routing/home > Input 1-16 = Card In 1-16, Input 17-32 = Local In 1-16 --> Routing/P16 > P16 channel 1-16 = Direct Out ch 17-32, select the signal tap as needed --> Routing/card out > Output 1-16 = P16 channel 1-16 This way you got full control over the insert point, and you can apply channel processing and even have separate faders prior and after your external automixing control... Hope that helps. Best, Jan [/QUOTE]

Verification