Reply to thread

Message

<blockquote data-quote="Dan Mortensen" data-source="post: 106441" data-attributes="member: 2826">Re: iPad App problems / X32CoreHi Lars and Don,Pardon my ignorance, but I had to go to a console to understand what you guys are talking about. I don&#039;t understand a workflow in which you adjust the input trim (&quot;preamps&quot;) without having some visual reference of the way your adjustments affect the electrical happiness of the channel, i.e., a meter. Nor do I understand a workflow in which the preamps are adjusted without immediately going into EQ and monitor level changes. And even when using iPads remotely with the X32, I adjust trim where there is a meter visible, and not on this Preamps tab.Before today, I hadn&#039;t seen a use for the Preamps Tab at all. (Redundantly --in terms of this thread-- pointing out that my Cores have been backordered for over two-approaching-three months, with no sign of future delivery, so maybe this is a Core workflow only that I&#039;ve yet to experience??) After looking at the Preamp tab for a while, I do see now that having the encoders set to the same visual level does not necessarily result in the exact same input trim adjustment, and that there is a 2.5 db variation in level before the encoder indicator lights change. I also see that there is over 10db of level change on each end of the input preamps beyond the point where the channel A/D gain changes. Is that all digital gain or is it something else? Am I completely missing the point of something that is apparently worth having its own tab?Thanks,Dan</blockquote>

[QUOTE="Dan Mortensen, post: 106441, member: 2826"] Re: iPad App problems / X32Core Hi Lars and Don, Pardon my ignorance, but I had to go to a console to understand what you guys are talking about. I don't understand a workflow in which you adjust the input trim ("preamps") without having some visual reference of the way your adjustments affect the electrical happiness of the channel, i.e., a meter. Nor do I understand a workflow in which the preamps are adjusted without immediately going into EQ and monitor level changes. And even when using iPads remotely with the X32, I adjust trim where there is a meter visible, and not on this Preamps tab. Before today, I hadn't seen a use for the Preamps Tab at all. (Redundantly --in terms of this thread-- pointing out that my Cores have been backordered for over two-approaching-three months, with no sign of future delivery, so maybe this is a Core workflow only that I've yet to experience??) After looking at the Preamp tab for a while, I do see now that having the encoders set to the same visual level does not necessarily result in the exact same input trim adjustment, and that there is a 2.5 db variation in level before the encoder indicator lights change. I also see that there is over 10db of level change on each end of the input preamps beyond the point where the channel A/D gain changes. Is that all digital gain or is it something else? Am I completely missing the point of something that is apparently worth having its own tab? Thanks, Dan [/QUOTE]

Verification