Reply to thread

Message

<blockquote data-quote="Klaus Mock" data-source="post: 107217" data-attributes="member: 2891">Re: Tablet for X32 RackHi,1) there a 16 mono mixbusses, a stereo main bus and a mono main bus. The 16 mixbusses can be used as monitor buses, effect busses or subgroups. Count all your desired busses, for stereo busses you have to count two busses, and if the resilt is not higher than 16 the anwer to question one is yes.2) you can use iPads and iPhones for that. X32-Q is a monitor control app which only can control the mixbus send levels. No other parameters can be modified. But every ios device with this app can control all mixbusses, one at a time.4) the one are xlr with possible phantom power the others are jacks without phantompower.5) yes and yes6) hmm. Outputs itself do not have any signalprocessing. You have to route a signal, of a bus or a matrix for instance, to that output. A bus or a matrix has a six band PEQ and you can insert one Fx out of the fx engines into the bus or matrix. The mixer have 8 stereo fx engines which can be used for reverb or similar effects or also as graphical Eq. For the EQs there are two types available. A stereo type for stereo busses where the eqs are linked, or dual eq types which means that one fx slot allows you to use them on two busses individually. So you can run for your confihuration one stereo for the mains and three dual for max. Six monitor busses and then there are four slots remaining for other effects. HTH</blockquote>

[QUOTE="Klaus Mock, post: 107217, member: 2891"] Re: Tablet for X32 Rack Hi, 1) there a 16 mono mixbusses, a stereo main bus and a mono main bus. The 16 mixbusses can be used as monitor buses, effect busses or subgroups. Count all your desired busses, for stereo busses you have to count two busses, and if the resilt is not higher than 16 the anwer to question one is yes. 2) you can use iPads and iPhones for that. X32-Q is a monitor control app which only can control the mixbus send levels. No other parameters can be modified. But every ios device with this app can control all mixbusses, one at a time. 4) the one are xlr with possible phantom power the others are jacks without phantompower. 5) yes and yes 6) hmm. Outputs itself do not have any signalprocessing. You have to route a signal, of a bus or a matrix for instance, to that output. A bus or a matrix has a six band PEQ and you can insert one Fx out of the fx engines into the bus or matrix. The mixer have 8 stereo fx engines which can be used for reverb or similar effects or also as graphical Eq. For the EQs there are two types available. A stereo type for stereo busses where the eqs are linked, or dual eq types which means that one fx slot allows you to use them on two busses individually. So you can run for your confihuration one stereo for the mains and three dual for max. Six monitor busses and then there are four slots remaining for other effects. HTH [/QUOTE]

Verification