Reply to thread

Message

<blockquote data-quote="John Rendell" data-source="post: 107392" data-attributes="member: 228">X32 Rack output routing head scratcherI picked up a X32 Rack + S16 to run as an in-ear system with my existing X32 (classic full size) and 2 S16&#039;s.I have been successful in various configurations of 2xS16-&gt;Monitor X32 Classic -&gt; FOH X32 Classic.&nbsp; As long as everything is routed correctly it worked just fine.The X32 Rack appears to be a bit different.&nbsp; It only has 16 physical ins and 8 physical outs.&nbsp; When looking at the Output section, outputs 8-&gt;16 are marked as virtual.I have been unable to come up with a routing solution that will allow me to use the X32 Rack + S16&#039;s that will let me mirror the outputs from the FOH outputs 9-16 to the S16.First configuration:X32 Rack + S16 -&gt; X32 Classic.&nbsp; X32 Rack controls the gain, X32 Classic has outputs on channels 13,14,15, and 16.Routing X32 Rack In 1-8 -&gt; 1-8X32 Rack In 9-16 -&gt; 9-16AES A S16 Rack In 17-24 -&gt; 17-24AES A S16 Rack in 25-32 -&gt; 25-32Outputs 1-8 are used for in ears and work fineAES B goes from the X32 Rack to the X32 FOH AES A portCorrect mapping is done in the AES B page(same as above, but from either the inputs or the AES A port)FOH AES A is set for outputs 1-8 on output 1-8&nbsp; output 9-16 on output 9-16.All input signals are working on both boards as expected.Outputs 1-8 on the X32 are working as expected.However nothing is routing to outputs 9-16.I usually run a 2xS16 snake to the FOH X32 board with a similar configuration for the outputs, and as expected the outputs are mirrored.I am guessing it is because the X32 Rack 9-16 outputs are virtual and not physical?Any ideas?Thanks!</blockquote>

[QUOTE="John Rendell, post: 107392, member: 228"] X32 Rack output routing head scratcher I picked up a X32 Rack + S16 to run as an in-ear system with my existing X32 (classic full size) and 2 S16's. I have been successful in various configurations of 2xS16->Monitor X32 Classic -> FOH X32 Classic. As long as everything is routed correctly it worked just fine. The X32 Rack appears to be a bit different. It only has 16 physical ins and 8 physical outs. When looking at the Output section, outputs 8->16 are marked as virtual. I have been unable to come up with a routing solution that will allow me to use the X32 Rack + S16's that will let me mirror the outputs from the FOH outputs 9-16 to the S16. First configuration: X32 Rack + S16 -> X32 Classic. X32 Rack controls the gain, X32 Classic has outputs on channels 13,14,15, and 16. Routing X32 Rack In 1-8 -> 1-8 X32 Rack In 9-16 -> 9-16 AES A S16 Rack In 17-24 -> 17-24 AES A S16 Rack in 25-32 -> 25-32 Outputs 1-8 are used for in ears and work fine AES B goes from the X32 Rack to the X32 FOH AES A port Correct mapping is done in the AES B page (same as above, but from either the inputs or the AES A port) FOH AES A is set for outputs 1-8 on output 1-8 output 9-16 on output 9-16. All input signals are working on both boards as expected. Outputs 1-8 on the X32 are working as expected. However nothing is routing to outputs 9-16. I usually run a 2xS16 snake to the FOH X32 board with a similar configuration for the outputs, and as expected the outputs are mirrored. I am guessing it is because the X32 Rack 9-16 outputs are virtual and not physical? Any ideas? Thanks! [/QUOTE]

Verification