Reply to thread

Message

<blockquote data-quote="James Drake" data-source="post: 107548" data-attributes="member: 1917">Re: X32core USB to mac&nbsp; crashes macThis is fantastic news.Is it too late to add wordclock I/O to the MADI and DANTE cards?Would you consider creating a new USB/FW card with wordclock I/O?Can you comment on the prices and availability?I hope the MADI and DANTE are both running at 44.1k and 48k? How do you handle the 56 vs 64 channel spec for the MADI, is it selectable? With both inputs there are a total of 112/128 inputs on the card, how are these handled? Is there extra routing at the card level to choose which 32 of these gets presented to the X32? Or are all of these inputs presented at the routing page where you choose in blocks of 8?Are the two outputs always mirrored?How is output routing handled? Can you cascade a MADI stream, so for example using two X32 mixers you could daisy chain and generate a 64 channel stream, with the first 1-32 from one X32 and 33-64 from the other? Will you include delay management to compensate for propagation delay (like the RME Octamic XTC)?Thanks, James.</blockquote>

[QUOTE="James Drake, post: 107548, member: 1917"] Re: X32core USB to mac crashes mac This is fantastic news. Is it too late to add wordclock I/O to the MADI and DANTE cards? Would you consider creating a new USB/FW card with wordclock I/O? Can you comment on the prices and availability? I hope the MADI and DANTE are both running at 44.1k and 48k? How do you handle the 56 vs 64 channel spec for the MADI, is it selectable? With both inputs there are a total of 112/128 inputs on the card, how are these handled? Is there extra routing at the card level to choose which 32 of these gets presented to the X32? Or are all of these inputs presented at the routing page where you choose in blocks of 8? Are the two outputs always mirrored? How is output routing handled? Can you cascade a MADI stream, so for example using two X32 mixers you could daisy chain and generate a 64 channel stream, with the first 1-32 from one X32 and 33-64 from the other? Will you include delay management to compensate for propagation delay (like the RME Octamic XTC)? Thanks, James. [/QUOTE]

Verification