Reply to thread

Message

<blockquote data-quote="Antoon van den Oetelaar" data-source="post: 112881" data-attributes="member: 3005">X32 full + S16 + X32 rack (as a S16)I just tested a combo of X32 full, 1x S16 and a X32 rack as a second S16.I did connect the S16 straight to the X32 full size, so I can control the gains from the X32 full size.The rack is connected to the S16. On the rack I want to connect the less important inputs (gain related) like keyboards, dj input etc.That way I have enough inputs available.I did want to mirror the outputs (out1-8) also on the X32 rack.But that wasn&#039;t easy because the analog outputs can&#039;t be feed from the AES50 inputs.So I selected the right channels I wanted to the outputs as inputs to the console, and then selected dir outputs in the analog out tab, to reduce risk of error I did select them all pre eq.As the rack doesn&#039;t do anything else, I don&#039;t have problems with the 8 input channels it does take. But what about latency? I think I did add more latency because of the extra processing on these inputs. Is this correct?</blockquote>

[QUOTE="Antoon van den Oetelaar, post: 112881, member: 3005"] X32 full + S16 + X32 rack (as a S16) I just tested a combo of X32 full, 1x S16 and a X32 rack as a second S16. I did connect the S16 straight to the X32 full size, so I can control the gains from the X32 full size. The rack is connected to the S16. On the rack I want to connect the less important inputs (gain related) like keyboards, dj input etc. That way I have enough inputs available. I did want to mirror the outputs (out1-8) also on the X32 rack. But that wasn't easy because the analog outputs can't be feed from the AES50 inputs. So I selected the right channels I wanted to the outputs as inputs to the console, and then selected dir outputs in the analog out tab, to reduce risk of error I did select them all pre eq. As the rack doesn't do anything else, I don't have problems with the 8 input channels it does take. But what about latency? I think I did add more latency because of the extra processing on these inputs. Is this correct? [/QUOTE]

Verification