Reply to thread

Message

<blockquote data-quote="Mike Horn" data-source="post: 114199" data-attributes="member: 4582">Re: How to restore desk setup into V2.01 firmwarei just loaded all my show files[only a dozen+...] on to 2.01b-with no apparent errorswhat i did:flash deskreset network settingsconnect xedit pc to console*do not synchronize*load each scene and savemain caveat: you have to use the desk to save the file on the deskx-edit cant write to the desk scene save [remember spinning encoder labeling?...]obviously if you want to xfera hundred scenes or a showfile this is not happeningbut if you are like me and have a few generic start scenesand a few client&#039;s shows saved it works if you want to try out the new stuff on a familiar filei&#039;l wait on the updated edit program to do the core...fwiw</blockquote>

[QUOTE="Mike Horn, post: 114199, member: 4582"] Re: How to restore desk setup into V2.01 firmware i just loaded all my show files [only a dozen+...] on to 2.01b -with no apparent errors what i did: flash desk reset network settings connect xedit pc to console *do not synchronize* load each scene and save main caveat: you have to use the desk to save the file on the desk x-edit cant write to the desk scene save [remember spinning encoder labeling?...] obviously if you want to xfer a hundred scenes or a showfile this is not happening but if you are like me and have a few generic start scenes and a few client's shows saved it works if you want to try out the new stuff on a familiar file i'l wait on the updated edit program to do the core... fwiw [/QUOTE]

Verification