Reply to thread

Message

<blockquote data-quote="Dan Mortensen" data-source="post: 121004" data-attributes="member: 2826">Re: S16 and phantom popsHi Jan,Keep in mind that he is not only switching scenes, but the contents of the preamps on the different S16&#039;s.Are you and Christian saying that by turning on 48v in the Preamps page it will follow the S16 during Scene changes, so that Ch. 17-20 can be phantomed continuously on one S16 regardless of whether it&#039;s active or not, and changing to another S16 with phantom on Ch. 21-24 in another scene will allow its channels to remain continuously powered (after also going to the preamp page and activating those channels in that different scene)?Or are you saying that all phantom powered channels on either S16 will need to be activated in the preamp page? So that, in this case, Ch. 17-24 on both S16&#039;s would remain powered all the time? The difference being that in one scene 17-20 are powered on that S16 and its contents while 21-24 are not, while on the other 17-20 are unpowered and 21-24 are.This is good, I&#039;ve said previously that I didn&#039;t understand the uses of the preamp page, and this is the third reason I&#039;ve seen to go there (the first being the monitor/FOH split control in 2.02, and the second being overall preamp control while remaining in split mode).Thanks,Dan</blockquote>

[QUOTE="Dan Mortensen, post: 121004, member: 2826"] Re: S16 and phantom pops Hi Jan, Keep in mind that he is not only switching scenes, but the contents of the preamps on the different S16's. Are you and Christian saying that by turning on 48v in the Preamps page it will follow the S16 during Scene changes, so that Ch. 17-20 can be phantomed continuously on one S16 regardless of whether it's active or not, and changing to another S16 with phantom on Ch. 21-24 in another scene will allow its channels to remain continuously powered (after also going to the preamp page and activating those channels in that different scene)? Or are you saying that all phantom powered channels on either S16 will need to be activated in the preamp page? So that, in this case, Ch. 17-24 on both S16's would remain powered all the time? The difference being that in one scene 17-20 are powered on that S16 and its contents while 21-24 are not, while on the other 17-20 are unpowered and 21-24 are. This is good, I've said previously that I didn't understand the uses of the preamp page, and this is the third reason I've seen to go there (the first being the monitor/FOH split control in 2.02, and the second being overall preamp control while remaining in split mode). Thanks, Dan [/QUOTE]

Verification