Reply to thread

Message

<blockquote data-quote="Dan Mortensen" data-source="post: 121081" data-attributes="member: 2826">Re: S16 and phantom popsHi Per,Rereading this part, maybe the difference is what you mean when you say &quot;I set the phantom on A1-16&quot;. What do you mean when you do that? My first scenario, which doesn&#039;t work, has me hitting the phantom physical switch on Ch. 1 with its Select button selected, and Routing selected from AES50A. The second has me setting it on AES50A1 in the preamps tab, where you have an option to set it in AES50A1, and/or Local 1, and/or AES50B1. You can pick one or you can pick all three together.Picking within that scene the two that will be switched back and forth, whether or not the same channel, and saving that scene allows them to stay on continuously whether used in that scene or not. Selecting from the channel button causes phantom to disappear when the other S16 is selected and reappear when the first S16 is selected the next time, resulting in the pop. At least in my testing.Could the problem be that you are only using one S16 and trying to pretend it&#039;s two? And you saying that the settings are intact implies that you think I&#039;m saying that the phantom settings disappear when going back to the original source from the second source, which is not what I&#039;m saying. I&#039;m saying the phantom power activity disappears from the first S16 when switching to the second S16 and reappears only when the first one is selected again, when setting phantom power using the channel select and not the preamps page.DanPS I got your PM and will reply later this afternoon or evening.</blockquote>

[QUOTE="Dan Mortensen, post: 121081, member: 2826"] Re: S16 and phantom pops Hi Per, Rereading this part, maybe the difference is what you mean when you say "I set the phantom on A1-16". What do you mean when you do that? My first scenario, which doesn't work, has me hitting the phantom physical switch on Ch. 1 with its Select button selected, and Routing selected from AES50A. The second has me setting it on AES50A1 in the preamps tab, where you have an option to set it in AES50A1, and/or Local 1, and/or AES50B1. You can pick one or you can pick all three together. Picking [B]within that scene[/B] the two that will be switched back and forth, whether or not the same channel, and saving that scene allows them to stay on continuously whether used in that scene or not. Selecting from the channel button causes phantom to disappear when the other S16 is selected and reappear when the first S16 is selected the next time, resulting in the pop. At least in my testing. Could the problem be that you are only using one S16 and trying to pretend it's two? And you saying that the settings are intact implies that you think I'm saying that the phantom settings disappear when going back to the original source from the second source, which is not what I'm saying. I'm saying the phantom power activity disappears from the first S16 when switching to the second S16 and reappears only when the first one is selected again, [B]when setting phantom power using the channel select and not the preamps page.[/B] Dan PS I got your PM and will reply later this afternoon or evening. [/QUOTE]

Verification