Reply to thread

Message

<blockquote data-quote="Dan McCoy" data-source="post: 122377" data-attributes="member: 6924">Re: HELP - P16 Routing - Time sensitive requestProblem resolved. Well sort of.&nbsp;&nbsp; Thanks to John Dinicola and Chase from Behringer/Midas who both separately called me and also to Dan Mortensen who called me.&nbsp; Turns out I discovered a hole in the featureset of the x32rack.&nbsp; It&#039;s not a true replacement of an S16.&nbsp; An s16 has the ability thru configs to route AES50A inputs (33-48) to its Ultranet P16 outs 1-16.&nbsp;&nbsp; An x32rack CANNOT do this.&nbsp;&nbsp; If you have an S16 connected to an x32rack you can pass the P16 from FOH =&gt; AES50A -&gt; AES50B to S16 (P16) but if you have inputs that appear on the FOH x32 only you can&#039;t pass them to the X32rack P16 outs.&nbsp; The 2.0X software needs to either add functionality to the P16 tab on the routing page to allow you to choose A(B)XX as sources to send to the P16(x) as you can now with the Direct Outs etc or they need to add a tab on the Routing Home page to allow this.&nbsp; &nbsp; For now I built a 175 foot shielded ethernet cable tonight to run from FOH P16 to the P16D for stage IEMs.&nbsp;&nbsp; This is just a backup if I don&#039;t have time to get it properly routed tomorrow morn through the S16</blockquote>

[QUOTE="Dan McCoy, post: 122377, member: 6924"] Re: HELP - P16 Routing - Time sensitive request Problem resolved. Well sort of. Thanks to John Dinicola and Chase from Behringer/Midas who both separately called me and also to Dan Mortensen who called me. Turns out I discovered a hole in the featureset of the x32rack. It's not a true replacement of an S16. An s16 has the ability thru configs to route AES50A inputs (33-48) to its Ultranet P16 outs 1-16. An x32rack CANNOT do this. If you have an S16 connected to an x32rack you can pass the P16 from FOH => AES50A -> AES50B to S16 (P16) but if you have inputs that appear on the FOH x32 only you can't pass them to the X32rack P16 outs. The 2.0X software needs to either add functionality to the P16 tab on the routing page to allow you to choose A(B)XX as sources to send to the P16(x) as you can now with the Direct Outs etc or they need to add a tab on the Routing Home page to allow this. For now I built a 175 foot shielded ethernet cable tonight to run from FOH P16 to the P16D for stage IEMs. This is just a backup if I don't have time to get it properly routed tomorrow morn through the S16 [/QUOTE]

Verification