Reply to thread

Message

<blockquote data-quote="Dan McCoy" data-source="post: 122383" data-attributes="member: 6924">Re: HELP - P16 Routing - Time sensitive request&nbsp;Per - Thanks. I was typing my below post when you posted this.&nbsp; I tried this this morning and couldn&#039;t get it to work.&nbsp; Ended up routing through to the S16 on AES50B and it worked after I fixed a routing issue.&nbsp;&nbsp; Turns out the same routing fix made your suggestions work too (went back after service and tested it.)One thing I would add to your suggestion is to make sure your P16 tap points are IN/LC so it&#039;s a straight passthrough for the x32rack from FOH.&nbsp; Don&#039;t need to have two consoles fighting each other.&nbsp; Also - ran into one problem the boys at Behringer (JOHN D - for you) should see.&nbsp;&nbsp; I patched Inputs 17-24 to AES50A 33-40.&nbsp; For some reason Channel 17 config didn&#039;t remap to A33.&nbsp; I didn&#039;t know this at first. It drove me nuts to understand why the vocal mic wasn&#039;t patching through to P16 Channel 1.&nbsp; All other patching worked.&nbsp; Then I noticed that Channel 17 showed no input.&nbsp; EVEN going and pressing the select button in the input routing to remap did not work.&nbsp;&nbsp; I had to move off the AES50A33-40 to something else and then back on to get it to remap.&nbsp; No clue what happened but it drove me nuts for 25 mins afterward.&nbsp; It&#039;s all working well now.&nbsp;&nbsp; I think every press of the knob button should send the remap command and not force you off and then back.</blockquote>

[QUOTE="Dan McCoy, post: 122383, member: 6924"] Re: HELP - P16 Routing - Time sensitive request Per - Thanks. I was typing my below post when you posted this. I tried this this morning and couldn't get it to work. Ended up routing through to the S16 on AES50B and it worked after I fixed a routing issue. Turns out the same routing fix made your suggestions work too (went back after service and tested it.)One thing I would add to your suggestion is to make sure your P16 tap points are IN/LC so it's a straight passthrough for the x32rack from FOH. Don't need to have two consoles fighting each other. Also - ran into one problem the boys at Behringer (JOHN D - for you) should see. I patched Inputs 17-24 to AES50A 33-40. For some reason Channel 17 config didn't remap to A33. I didn't know this at first. It drove me nuts to understand why the vocal mic wasn't patching through to P16 Channel 1. All other patching worked. Then I noticed that Channel 17 showed no input. EVEN going and pressing the select button in the input routing to remap did not work. I had to move off the AES50A33-40 to something else and then back on to get it to remap. No clue what happened but it drove me nuts for 25 mins afterward. It's all working well now. I think every press of the knob button should send the remap command and not force you off and then back. [/QUOTE]

Verification